Donald Trump elected 47th US president

The Republican candidate has won at least 277 Electoral College votes, per The Associated Press.

Donald Trump has been elected to return to the White House as the 47th United States president.

The vote was called for the Republican candidate by The Associated Press news agency early on Wednesday. His victory has been met by international congratulations but is likely to add further uncertainty to a turbulent geopolitical situation.

Results showed Trump beating Vice President Kamala Harris in a race far less tight than expected as he triumphed in key battleground states.

Victory in Wisconsin after earlier triumphs in Georgia, North Carolina and Pennsylvania saw the former president clear the threshold of the 270 Electoral College votes required to clinch the White House in Tuesday’s election.

Trump’s victory in those swing states currently sees him with 277 electoral votes against 224 for Harris. Polls had predicted a much tighter race, but it appears that anger fuelled the Republican’s remarkable comeback from defeat in 2020 and widespread condemnation of his refusal to accept the result.

That refusal sparked a violent insurrection at the US Capitol, and Trump was also convicted of felony charges and survived two assassination attempts.

However, his campaign, which has seen him demonise his political opponents, immigrants and many minorities, tapped into the frustrations of many voters in a bitterly polarised nation.

Speaking to his supporters as he declared victory, Trump claimed he had won “an unprecedented and powerful mandate”.

Anger and resentment

Scott Lucas, a professor of international politics at the University of Dublin, told Al Jazeera that Trump’s victory stemmed from frustrations that have been bubbling within the US public for years.

“There is anger and resentment in the US, which has been there for quite some time. It’s been a trauma since 9/11. It’s been there with the financial crash in 2008-2009. It was there in 2016 when Trump exploited it, and he exploited it again,” Lucas said, adding that Trump was able to do that because the “political system is damaged”.

Concern over the economy, and inflation in particular, under President Joe Biden was a major focus of the campaign.

That also encouraged opposition to the support Washington is giving to Ukraine in its war against Russia. Meanwhile, the failure to rein in Israel’s wars on Gaza and Lebanon has angered Muslim and liberal voters.

Those complex geopolitical issues will test Trump, who is known for his simplistic claims of being capable of quickly solving such issues.

He has promised to end the war in Ukraine in a day, an idea that has Kyiv wary that it could face pressure to strike a deal to hand over territory to Russia. NATO allies, meanwhile, fear Trump will weaken the alliance’s mutual defence guarantees.

Trump is also a strong supporter of Israeli Prime Minister Benjamin Netanyahu and has boasted he will end the war with Hamas in Gaza in hours.

“Your historic return to the White House offers a new beginning for America and a powerful recommitment to the great alliance between Israel and America. This is a huge victory!” Netanyahu said in a statement after Trump declared victory.

The enthusiasm in Israel also stems from the incoming president’s hawkish approach to Iran, which he is likely to reassert.

China is also braced for a more confrontational relationship with the US under Trump, who is expected to revive staunchly nationalistic trade policies, putting both allies and rivals on edge.

‘Much more dangerous era’

However, at home, supporters will look to Trump to put the focus on the welfare of US citizens while following through on promises to enact an agenda that would transform nearly every aspect of American government.

That will include plans to launch the largest deportation effort in the nation’s history and use the Department of Justice to punish his enemies.

The result is that “we are going into a much more dangerous era for Americans and for the world because this will not be a coherent US policy for America but one pursued for Trump,” Lucas said.

13 Simple Tips of How to Spot Poor Quality Shoes Right On

Ideally, a new pair of shoes should be comfortable and fashionable. However, you may find a lot of options in footwear shops that meet these 2 criteria, but at the same time their quality is so bad that they won’t last long. We decided to find out what things you should pay attention to in order to choose a really high-quality pair.

Check the shoes for smudges and glue marks.

Manufacturers often use glue to stick together different parts of the shoe. If the glue is of high quality and the work is done properly, the pair will last a long time. However, small glue drips in the spots where parts meet or traces of glue on the surface indicate that you are looking at low-quality shoes and that there were issues during production.

When a part of the shoe, its sole or insole, comes off a bit, it means the shoemaker probably used bad or expired glue, and this pair will fall apart quickly.

Examine whether the pair is symmetrical.

Quality shoes in a pair should be symmetrical, and any differences between the right and left shoes most likely indicate a defect. To check this, you need to put the soles of both shoes together and see if they match in length and width.

It’s also worth putting the pair on the floor to understand whether the height and outline of the upper edge of the heel are symmetrical. If the soles are painted in different colors, check whether the paint is within the borders of the sole and whether the pattern matches. Gross irregularities in symmetry indicate that the manufacturer didn’t pay much attention to quality.

Check the seams carefully.

Any uneven or diverging seams make shoes look not that good. This happens if the manufacturer used too thin threads or the work was done poorly. As a result, such a pair will fall apart much faster. It’s also necessary to check the uniformity of stitches and the evenness of the seam itself.

If its line is curved or zigzag-looking, this means that the shoes you’re looking at are of poor quality and will lose their appearance in a couple of months. And zigzag-looking stitch is often used to hide the imperfections of the stitching.

Examine the heels.

The heel must be firmly attached to the sole and not wobble. It’s necessary to look at the shoes from the side. In good quality pumps, the high heels are positioned exactly under the center of the heel and touch the ground at a slight incline.

It’s worth looking carefully at the heels from behind – any deviation of the heels from the angle of 90⁰ indicates a defective product. Moreover, these shoes are simply dangerous to wear – this may lead to ankle injuries.

Loose eyelets are a bad sign.

Any metal or plastic parts on the shoe (especially those that come into contact with the skin) should be tightly fastened. Thus, it’s worth carefully examining the eyelets for laces. Although this defect is quite rare, it can lead to wearer’s injury.

You should also check how well any embellishments are attached to the shoe. If they fall off at one point, the pair won’t look good anymore.

Carefully inspect the inside of the shoe.

Some manufacturers save on the training of workers and don’t calibrate equipment before the production of a new product line. As a result, shoes, boots and sneakers may have seemingly insignificant defects such as wrinkles and creases. If these defects are small, they won’t cause much trouble to the wearer. But large creases can rub the skin while walking, which will lead to abrasions and blisters on the feet.

Examine the insoles.

Even if a shoe looks perfect from the outside, you need to scrutinize it from the inside too. If the insoles show small wrinkles and creases, this pair is likely to be uncomfortable to wear. In addition, you should carefully feel the insoles to make sure that there are no bubbles on them.

Another important thing is that there must be cushioning between the insole and the sole, especially in the toe and heel area. Otherwise, a long walk in these shoes will make not only your feet and legs sore, but also your back.

Check how the shoes smell.

Low-quality and cheap shoes often have a strong chemical odor. It’s best to refrain from buying this pair. But if shoes or boots exude the scent of leather, polish or wood, you’ve found the shoes of high quality.

Take a photo of the shoes.

Of course, shoes made of synthetic materials can also be of high quality, especially when it comes to sports models. But good shoes should ideally be made of leather. They are softer and fit better on the foot, which means they will be much more comfortable to wear.

However, the quality of leather also varies. Often, manufacturers don’t mention the type of leather they use to make shoes in order to keep costs down. To determine the quality of the product you are holding in your hands, you need to take a photo of the shoes and enlarge the image. If you can see pores on the leather, you can safely buy the shoes.

Bend the shoe a little bit.

You don’t need to knead your shoes too much, but you can bend the shoe slightly to see how flexible the sole is and whether it remains attached to the upper part when moved. In addition, it’s worth pressing the sides of the shoe a little bit. Throughout the day, our feet usually increase in size a little, so a quality pair should adapt to these changes.

Check how your shoes sound.

Most shoe shops have soft carpeting on the floor, so it’s a good idea to take a short walk on a harder surface before making a purchase. If the soles and heels make unpleasant clanking noises when you walk, you are likely to be wearing a low-quality pair. And platform or wedge shoes shouldn’t sound like there are voids inside the sole.

Examine the material of the sole and heel carefully.

Usually the sole of a really good quality pair is made of leather or good rubber. These shoes are comfortable to wear, and in addition, they almost don’t slip. At the same time, if the base of the sole is uneven, then these shoes will be uncomfortable.

In addition, it’s worth examining the material from which the heels are made. If the manufacturer used plastic or didn’t cover the heel with leather or fabric, then you are looking at a cheap product that is far from being perfect.

Rub the shoes with a cloth.

Sometimes manufacturers use poor quality leather dyes, which can leave marks on the skin or clothes. Therefore, before buying, you should carefully rub the shoes inside and outside, first with a dry cloth and then with a damp cloth. If there are no marks on the fabric, the shoes are okay.

And here’s a list of fashionable shoes that are not as cool as they look.

Related Posts

Be the first to comment

Leave a Reply

Your email address will not be published.


*